Log In
Sign Up
Information Technology
Cummins Inc. Hiring for Technology Planning, System Design, Modelling and Integration at Pune, Maharashtra Full Time
Full Job Description
This product focused position performs established technical tasks at the product and cross-business integration level for current and future products within a given business unit or corporate area. This involves work across many steps in the product life cycle. Because of the product centered nature of this position, they are very often a central point of coordination and decision making between product engineers, product line engineers, customer teams, purchasing, suppliers and manufacturing.
Obtains input from stakeholders such as technical managers, project leaders, other product and manufacturing engineers and supplier partners to deliver information and recommendations that lead to quality product decisions.
Applies academic knowledge and existing experience to take action and make decisions that progress projects forward without sacrificing project quality expectations. Examples of these decisions include day to day project details, analysis or test work instruction details, coordination across discipline areas, etc. that are necessary to make quality progress.
Applies and improves processes such as ESW, iDFMEA, FIRG and tools such as 7-step problem solving, design review checklist and other specialized tools required to support the processes and enable high quality decision making.
Provides independent leadership of smaller business impact projects or ownership of complex components, products, systems or services with greater elements of ambiguity over the senior or lead engineer level and with full accountability to the project team.
Delivers independent execution of established and emerging work processes and systems, while still developing technology or product knowledge.
Leads the development and improvement of work processes and systems across a functional discipline area within a business unit site.
Coordinates and directs work amongst technicians and temporary student employees, assists in the transfer of knowledge to lesser experienced engineers through either indirect (scope of influence) or direct management of a small, local group of engineers.
Provides support and guidance to influence technical direction within a project team and continues to develop proficiency in the competency areas critical to success in the role.
Operates as a recognized specialist in a discipline or product area within the immediate team.
Obtains input from stakeholders such as technical managers, project leaders, other product and manufacturing engineers and supplier partners to deliver information and recommendations that lead to quality product decisions.
Applies academic knowledge and existing experience to take action and make decisions that progress projects forward without sacrificing project quality expectations. Examples of these decisions include day to day project details, analysis or test work instruction details, coordination across discipline areas, etc. that are necessary to make quality progress.
Applies and improves processes such as ESW, iDFMEA, FIRG and tools such as 7-step problem solving, design review checklist and other specialized tools required to support the processes and enable high quality decision making.
Provides independent leadership of smaller business impact projects or ownership of complex components, products, systems or services with greater elements of ambiguity over the senior or lead engineer level and with full accountability to the project team.
Delivers independent execution of established and emerging work processes and systems, while still developing technology or product knowledge.
Leads the development and improvement of work processes and systems across a functional discipline area within a business unit site.
Coordinates and directs work amongst technicians and temporary student employees, assists in the transfer of knowledge to lesser experienced engineers through either indirect (scope of influence) or direct management of a small, local group of engineers.
Provides support and guidance to influence technical direction within a project team and continues to develop proficiency in the competency areas critical to success in the role.
Operates as a recognized specialist in a discipline or product area within the immediate team.
Qualifications
Skills
Systems Thinking – Defines the system of interest by drawing the boundaries, identifying its context within its environment, its interfaces, and that it has a lifecycle to aid in planning the problem statement, scope and deliverables ; analyzes linkages and interactions between elements that comprise the system of interest by using appropriate methods, models and integration of outcomes to understand the system, predict its behavior and devise modifications to it in order to produce the desired effects.
Product Verification and Validation Management – Develops product systems validation plans from a variety of inputs to identify failure modes, while managing product risk and relative priority; negotiates product requirements against capability to guide project scope; evaluates analytical, simulation and physical test results to verify product capability and validate requirements; assesses legacy versus proposed system solution capabilities and produces recommendations with technical documentation to support product decisions.
System Requirements Engineering – Uses appropriate methods and tools to translate stakeholder needs into verifiable requirements to which designs are developed; establishes acceptance criteria for the system of interest through analysis, allocation and negotiation; tracks the status of requirements throughout the system lifecycle; assesses the impact of changes to system requirements on project scope, schedule, and resources; creates and maintains information linkages to related artifacts.
Product Interface Management and Integration – Identifies and analyzes the interfaces and interactions across system boundaries by specifying the requirements and limits to ensure that the product meets requirements; controls the interactions across the system element boundaries by making sure that they remain within specified limits; integrates system elements by creating an integration plan, including identification of method and timing for each activity to make it easier to find, isolate, diagnose, and correct.
Product Problem Solving – Solves product problems using a process that protects the customer; determines the assignable cause; implements robust, data-based solutions; and identifies the systemic root causes and recommended actions to prevent problem reoccurrence.
Product Failure Mode Avoidance – Mitigates potential product failure modes, by identifying interfaces, functions, functional requirements, interactions, control factors, noise factors, and prioritized potential failure modes and potential failure causes for the system of interest to effectively and efficiently improve the reliability of Cummins’ products.
Decision quality – Making good and timely decisions that keep the organization moving forward.
Drives results – Consistently achieving results, even under tough circumstances.
Communicates effectively – Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
Builds networks – Effectively building formal and informal relationship networks inside and outside the organization.
Resourcefulness – Securing and deploying resources effectively and efficiently.
Manages complexity – Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.
Education, Licenses, Certifications
College, university, or equivalent Bachelor’s degree in Engineering or other relevant technical disciplines is required.
This position may require licensing for compliance with export controls or sanctions regulations.
Experience
Prior Senior or Lead Engineer equivalent work experience in a relevant discipline area is required with a demonstrated track record of technical problem solving and quality decision making. Knowledge of MS Office tools is preferred.
Good experience in modelling & simulation of electrification/power electronic and powertrain systems
Strong systems fundamental background
Good controls and electrical basics background
Good knowledge of Thermal and Fluid science as applied to engine & aftertreatment systems, fuel cell systems, battery systems
Good understanding of Technology Planning aspects
Strong system simulation experience with respect to vehicle or a machine ‘system’
Basic understanding of software/tool development fundamentals
Basic understanding of version control & software documentation
Ability to expertly use (at least some, and learn what is needed) simulation tools, like MatLab, Simulink, Cyber-apps, MS tools with associated VBA, Mode Frontier Optimizer, Python etc.
Basic understanding of Cummins data acquisition tools, ability to use the data coming from these for modelling, correlations, and validations
Ability to translate Customer requirements into making duty cycle and drive cycle assumptions to feed into models. Ability to create models that incorporate different levels of eco-system elements and ability to mass process data. To calibrate models based on various levels of data.
Performing competitive application modelling for benchmarking. Ability to go across various applications to perform modelling, benchmarking, comparisons and making recommendations
Ability to quickly turn around simulations and following analysis, distilling insights and presenting results.
Better if: Able to perform CAD modelling for layouts
Better if: Able to perform high level thermal and fluid system design and analysis or high level electrical/controls system design
Good experience in modelling & simulation of electrification/power electronic and powertrain systems
Strong systems fundamental background
Good controls and electrical basics background
Good knowledge of Thermal and Fluid science as applied to engine & aftertreatment systems, fuel cell systems, battery systems
Good understanding of Technology Planning aspects
Strong system simulation experience with respect to vehicle or a machine ‘system’
Basic understanding of software/tool development fundamentals
Basic understanding of version control & software documentation
Ability to expertly use (at least some, and learn what is needed) simulation tools, like MatLab, Simulink, Cyber-apps, MS tools with associated VBA, Mode Frontier Optimizer, Python etc.
Basic understanding of Cummins data acquisition tools, ability to use the data coming from these for modelling, correlations, and validations
Ability to translate Customer requirements into making duty cycle and drive cycle assumptions to feed into models. Ability to create models that incorporate different levels of eco-system elements and ability to mass process data. To calibrate models based on various levels of data.
Performing competitive application modelling for benchmarking. Ability to go across various applications to perform modelling, benchmarking, comparisons and making recommendations
Ability to quickly turn around simulations and following analysis, distilling insights and presenting results.
Better if: Able to perform CAD modelling for layouts
Better if: Able to perform high level thermal and fluid system design and analysis or high level electrical/controls system design
Job
ENGINEERING
Primary Location
India-Maharashtra-Pune-India, Pune, Cummins Technical Center India
Job Type
Experienced – Exempt / Office
Recruitment Job Type Exempt – Experienced
Job Posting
Dec 31, 2021, 3:19:22 AM
Unposting Date
Jan 7, 2022, 1:29:00 PM